How to Wax a Jacket: A Step-By-Step Guide to Waterproof Cotton

0
237
Video waterproofing cotton jacket

Summer’s over, and you head to your closet to bring your favorite waxed canvas jacket back into your rotation.

But something’s off. It’s lost some of its sheen since you purchased it and, lo and behold, it doesn’t repel as much water as it used to either.

That’s when you realized there’s more to waxed jackets than the timeless, rugged outdoorsman aesthetic: the wax also has functional benefits.

Thankfully, you don’t have to buy a new one. You can bring back the water resistant properties of your canvas jacket with a can of wax and a bit of elbow grease.

Today, we’re going to talk about how to re-wax your waxed canvas jacket (it’s quite a straightforward process actually) and you’re also going to learn how waxed canvas first came to be, what kinds of waxes you can use, and when you should re-wax your jacket.

[SHOP THIS TOM BECKBE WAXED JACKET HERE]

The History of Waxed Canvas

Before synthetic waterproof fabrics were invented during the late 20th century, waxed canvas was the fabric of choice for fishermen, hunters, and explorers for keeping water out of their bodies and gear.

Sailors as early as the 16th century found out that wet sails caught the wind better, but water made the sails too heavy. They were then able to figure out that replacing the water with fish oil did the trick without the weight penalty. Eventually they began to make their work clothing out of waxed canvas fabric to better protect themselves from the elements as well.

Later in the 19th century, a by-product of petroleum called paraffin wax was introduced, which improved the water and wind resistance of waxed canvas without being too stiff. The fabric also didn’t turn yellow compared to organic oils like linseed and fish oil.

[Related: The 7 Best Waxed Jackets for Men]

tom beckbe tensaw jacket firing range
The Tom Beckbe Tensaw Jacket

The Benefits of Waxed Jackets

  • Water resistant
  • Develops patina
  • Abrasion resistant

We wrote a whole article outlining the benefits of waxed jackets, but for starters, they’re typically already made from canvas. Canvas is a very densely woven cotton that’s resistant to tearing and abrasion, making it ideal for more rugged wear. That’s why you’ll often see it on hunting jackets and outerwear made for braving the outdoors.

See also  The 12 Best Insoles For Work Boots

Applying a layer of wax adds water resistance. Cotton, for all its wonderfulness, absorbs a lot of water. Think of the last time you tried drying your soaking wet jeans — cotton absorbs. Fortunately, wax is hydrophobic, which is a reason why it’s also popular for making suede boots more resistant to water and stains. The wax creates a barrier around the fabric that water beads off of.

Waxed cotton also looks damn cool. Sometimes called a “patina cheat code,” it quickly forms creases and slight color permutations that make the jacket look worn in, but in an attractive way. That’s the beauty of canvas, leather, and other heritage apparel: it looks better as it ages, and waxing your cotton helps to speed up the process and bring a new dimension to your jacket’s aesthetic.

Maybe you don’t prioritize aesthetics, but like we said: it also keeps the water off. Win/win.

[Learn more: How Waterproof Are Waxed Jackets?]

wagner heat gun
This goes a lot more easily with this $25 heat gun.

Supplies for Waxing a Jacket

Ready to get waxin’?

You’re gonna need the following for this project:

  1. Wax
  2. A heat gun or hair dryer
  3. A sponge or rag
  4. Plastic gloves (optional)

You might feel like a heat gun is overkill, but as you can see in our video, it makes the process much simpler and makes it easier to create uniformly smooth — and effective — coating of wax.

tom beckbe reproofing wax

Forms of wax

Before we get into the types of wax typically used in re-waxing waxed canvas, let’s talk first about the two forms of wax available in the market today for these purposes: canned wax and bar wax.

Canned wax

As the name implies, the wax is in a can and you can either use a heat gun or submerge the can in hot water to melt the wax.

Bar wax

Bar wax, on the other hand, looks like a soap bar and you apply it by heating the bar first then rubbing the wet wax onto the jacket.

Types of wax

The types of wax can generally be categorized as either petroleum-based such as paraffin or organic ones like beeswax and plant-based blends.

Take note of these when buying wax especially if you’re concerned about health hazards.

Paraffin

We’ve discussed briefly about paraffin wax in a previous section, and it’s a staple for re-waxing waxed canvas. It is a by-product of the petroleum industry and so it can be toxic when heated too much. Make sure there’s enough ventilation in your work area when using it.

See also  Which Are The Most Popular Beers in Montana?

Tom Beckbe, Filson and Barbour sell waxes for their jackets made of paraffin and generally recommend it only for their respective waxed products.

Organic

Organic wax for waterproofing is usually a blend of beeswax and plant-based waxes and oils, and these tend to be non-toxic.

Brands often tend to keep their formula a secret, though two popular brands out there are Martexin and Otter Wax.

tom beckbe tensaw jacket waxing

When should you re-wax your jacket?

Like conditioning your leather boots, re-waxing depends on how often you use your jacket.

And the more often you use it, the more often you’ll have to re-wax it. It’s really that simple.

What’s important is to notice if your jacket is not repelling water anymore, which is the biggest sign that you should re-wax it already.

Thankfully there are also visual indicators. The areas where the wax has worn out tend to appear lighter compared to the areas that still have enough wax in them. These areas also often move more, such as the sleeve, the hem, the elbow, and under the arms. If you throw some water on the elbow and your skin gets wet, it’s a sign to start waxing.

tom beckbe tensaw jacket with shotgun
The Tensaw Jacket from Tom Beckbe

How to Wax Your Jacket

There are four general steps when re-waxing your canvas jacket, which

Clean your jacket

Although many tell you not to clean waxed jackets at all, this is an important step, as small bits of dirt can actually damage the canvas fabric over time. If left on the jacket, they’ll get trapped under the wax and potentially degrade the stitching and fabric over time.

However, soaps and detergents are generally not recommended when cleaning waxed canvas, nor is a washing machine since those can agitate the wax off of your jacket.

So to remove dirt and bad odors, the best way to clean your jacket is to use a brush to brush off the dirt, then gently clean the surface with a damp cloth or wet sponge, ideally with some canvas cleaner. Just don’t use detergent.

See also  How To Dress For Your Upcoming Hunting Trip

The idea is not to get the fabric soaked in water, just get it relatively clean and let it dry before moving onto the next step.

[Learn more: How to Clean a Waxed Jacket]

heating bar of wax
A heat gun helps to soften bar wax and tinned wax, preparing it for application.

Melt the wax

If you’re using canned wax, you can either place the can on a bowl of hot water first or you can use a heat gun to melt the wax.

If you’re using bar wax, heat one side only while you hold it on the other. This makes it much easier to spread compared to a solid bar where you’ll be applying more force.

sponge wax application

Apply the wax

If you’re using canned wax, dip your sponge or towel in the wax and rub that on the fabric. You can either go in circles or linear strokes.

If you’re using bar wax, just rub it onto the fabric. Don’t heat too much of the bar so you still have a firm and comfortable grip on it.

After you apply the wax on the jacket, immediately follow it up with the heat gun or hair dryer so the wax absorbs faster and spreads more uniformly.

Excess wax will tend to be unabsorbed after applying heat and you can either spread it to other areas or blot it out. This is also a sign that you should move on to other areas.

Notice the areas that still have a wet sheen after heating. Those areas have excess wax.

tom beckbe tensaw jacket sleeve

Dry the jacket overnight

Once you’re done re-waxing your jacket, it will still be slightly damp to the touch and will still have a wet look to it.

Before you use it right away, let it hang dry overnight first to let the wax set and bring back the water repellency. Feel free to hang it in your bathroom or outside.

tom beckbe tensaw jacket waxed

Ready to wax your own jacket?

And that’s it!

To re-wax your own canvas jacket, you’d need wax, heat, and a tiny bit of elbow grease..

Clean the jacket first then you can apply the wax. And less is more when applying wax, since it’s much easier to add little by little.

Take your time and enjoy the process of maintaining waxed canvas, which you might actually find to be quite satisfying.

Previous articleHam Radio Buyer’s Guide: How to Choose the Best Ham Radio
Next articleThe 5 Best Inline Ice Fishing Reels (2024)
Ethan Smith is a seasoned marine veteran, professional blogger, witty and edgy writer, and an avid hunter. He spent a great deal of his childhood years around the Apache-Sitgreaves National Forest in Arizona. Watching active hunters practise their craft initiated him into the world of hunting and rubrics of outdoor life. He also honed his writing skills by sharing his outdoor experiences with fellow schoolmates through their high school’s magazine. Further along the way, the US Marine Corps got wind of his excellent combination of skills and sought to put them into good use by employing him as a combat correspondent. He now shares his income from this prestigious job with his wife and one kid. Read more >>