The Best Glock Suppressor Sights in 2024

By
Ethan Smith
-
0
586

Not sure what suppressor sights to get for your Glock?

Look no further.

I’ve tested ALL the best Glock suppressor sights, arranged them into categories, and even included accessories and installation techniques.

By the end of this guide, you’ll find the perfect suppressor sight for your Glock.

Let’s get started!

Trijicon Glock Suppressor Night Sight Set

Trijicon Bright & Tough Night Sight Suppressor Set

AMERIGLO GL-506 Tall Black Serrated Suppressor

AMERIGLO GL-329 Tall Suppress

What are Suppressor Sights?

There are two key factors to shooting accurately when using a handgun with iron sights: correct sight alignment and a clear sight picture.

Many shooters own Glock pistols fitted with suppressors or have the best reflex sights installed on their handguns. Unfortunately, your line of sight will be obstructed when using factory sights.

How?

Due to the circumference of most suppressors— being larger than the barrel of the handgun— it can block the sight picture ahead of the front sight.

Also, if you have a red dot installed on the slide, the RDS housing sits in between the front and rear sights. This can obscure your target.

If your pistol is configured this way, you’ll most likely need to install suppressor sights.

These are aftermarket sights that are specially engineered to sit higher than the suppressor, making your line of sight unobstructed again.

The Best Glock Suppressor Sights

If you’re pressed on time, here’s a quick list of the best Glock suppressor sights:

  1. Trijicon Glock Suppressor Night Sights Set: Best Glock 19 Suppressor Sights
  2. Trijicon Bright & Tough Night Sights Suppressor Set: Best Night Sights for Glock
  3. AMERIGLO GL-506 Tall Black Serrated Suppressor: Best for the Budget
  4. AMERIGLO GL-329 Tall Suppress: Best for Glock 17

1. Trijicon Glock Suppressor Night Sight Set: Best Glock 19 Suppressor Sights

The Trijicon Glock Night Set is the best suppressor height sight for the Glock 19.

Trijicon specifically engineered this sight to be used with a suppressor or as backup iron sights.

In fact:

They advertise it to improve shooting accuracy by as much as five times compared to just conventional sights.

My question: Is this true?

Let’s find out!

Brightness

The Trijicon Glock suppressor sights have an exceptionally visible sight picture.

Each lamp is capped with a sapphire jewel intended to evenly distribute the light. I can confirm it performs well in no-light and low-light situations.

The white outline helps with the visibility— day or night. The different colored Tritium lamps give great contrast for quick target acquisition.

I do understand the orange trits have a shorter lifespan, but given the affordable price tag, I don’t mind it at all given the sight picture.

TRIJICON GLOCK SUPPRESSOR FRONT SIGHT

Durability

The Trijicon Suppressor Night Sights have a sleek yet durable finish.

These sights’ tritium lamps are contained inside aluminum cylinders for maximum protection.

It also comes with extra silicone rubber cushioning for heavy recoil. You won’t need to worry about harsh cleaning solvents either.

One con I’d like to point out:

The edges of the rear and front sights are VERY sharp. It becomes uncomfortable after a while unless I’m wearing an undershirt.

Mounting & Installation

The Trijicon Suppressor Night Sight Set is incredibly easy to install.

TRIJICON GLOCK SUPPRESSOR MOUNTED

I used a front sight hex tool

and a universal sight pusher tool from Amazon.

Before installing the front sight, I dropped a little Loctite Heavy Duty Threadlocker to secure the screw into the front sight base. It wiggles slightly but doesn’t affect the accuracy of the gun at all.

On the plus side, it co-witnesses perfectly with my suppressor and Trijicon RMR.

TRIJICON GLOCK SUPPRESSOR FRONT SIGHT

Is the Trijicon Night Sight Set worth it?

If you’re looking for excellent sights that are easy to install on your Glock 19, get the Trijicon Glock Suppressor Night Sight Set.

See also  6 Ways to Tenderize Wild Boar Meat

Why? It guarantees:

  • Quick installation
  • Durable construction
  • Self-illuminated Bright Tritium
  • Excellent low light performance

Plus, Trijicon offers a warranty on all sights to be free of defects in material and workmanship for the lifetime of the original owner. If you find any issues, they’ll replace them free of charge.

TRIJICON GLOCK SUPPRESSOR FRONT SIGHT (1)

Overall, the Trijicon Suppressor Night Sight Set works flawlessly.

In case you didn’t know, Trijicon is on the top of my list for the best mp shield night sights as well. I mean— It’s Trijicon, after all.

2. Trijicon Bright & Tough Night Sight Suppressor Set: Best Night Sights for Glock

The Trijicon Bright & Tough Night Sight Suppressor Set is the best night sight for the Glock.

As a matter of fact:

Almost all of my handguns have Trijicon night sights installed on them.

BUT, I’m not biased. I put these sights through torture and hand-testing

Here’s how it went…

Brightness

The Trijicon Bright & Tough Set is remarkably visible— both day and night.

TRIJICON BRIGHT&TOUGH GREEN ILLUMINATION IN DARK

It’s not too bright where your eye is distracted but bright enough to quickly acquire your target and get a perfect sight picture.

I keep it on my nightstand and I can easily tell how my handgun’s positioned thanks to the trillium.

I prefer the white outline on the front and rear sights. Some shooters choose orange on the front, but all white works just as well, especially if you have old eyes.

On that note:

If you co-witness with red dots and struggle shooting accurately, I recommend checking out holographic weapon sights (like the EOTECH EXPS2 or 3).

Durability

The Trijicon Bright and Tough sights live up to their name— insanely tough.

TRIJICON BRIGHT&TOUGH REAR SIGHT (2)

These night sights are constructed with a metal body and silicone rubber cushions for high-grade durability.

The Bright & Tough sights’ aluminum cylinders protect the tritium lamps from heavy recoil. I’ve also done multiple drop tests and found no issues.

TRIJICON BRIGHT&TOUGH REAR SIGHT (1)

These sights were produced almost two decades ago and they still perform just as well as the day I purchased them.

Mounting & Installation

Installing the Trijicon Suppressor Night Sight Set is a breeze.

TRIJICON BRIGHT&TOUGH MOUNTED

I currently have them mounted on my gen 5 Glock 19 MOS. The front sight takes a little bit of effort to get perfectly aligned and torqued but it worked great in the end.

Plus, they co-witness like a dream with my suppressor and Vortex Sparc red dot combo.

Additionally:

I bought a Safariland Hi-Ride Belt Loop Holster which has a built-in ridge to accommodate the suppressor height front sight.

Overall, I’m very happy with the entire configuration together.

TRIJICON BRIGHT&TOUGH REAR SIGHT

Is the Trijicon Glock Suppressor Night Sight Set worth it?

Absolutely! The Trijicon Bright & Tough Night Sight Set is an excellent choice when you’re running a suppressor on your Glock.

Why? It features:

  • Unmatched durability
  • Enhanced sight acquisition
  • Long-lasting and bright Tritium night sights
  • Compatibility with many Glock models

To top it all off:

The yellow tritium lamp has a warranty for 12 years and the orange lamp for 5 years from the date of original manufacture.

The Trijicon Bright & Tough Night Sight Set may be more expensive but definitely a top choice by many Glock owners.

Speaking of top choices, check out my latest review on the best quick detach scope mounts!

3. AMERIGLO GL-506 Tall Black Serrated Suppressor: Best for the Budget

The AMERIGLO GL-506 Suppressor Set is the best sight for your money.

Before I made my purchase, I did some research and discovered rave reviews on these $45 sights.

I had to try it out myself! Needless to say, I’m impressed.

Here’s why…

Brightness

The AMERIGLO GL-506 performs well in high contrast/light conditions.

Why?

These aren’t night sights. They’re black suppressor height sights with no markings. They still work in lowlight conditions, but not like your tritium night sights.

The front sight post is serrated to reduce glare from sunlight. Also, the rear sight design allows easy, one-handed slide manipulation.

These iron sights are amazing for suppressor use, but here’s why I really like them:

The blacked-out front sight is exceptional for red dot use especially when combined with night vision. It reduces the clutter of your sight picture for simple front sight acquisition.

See also  The Dark Side… Night Fishing for Big Brown Trout Let’s Face It, in Most Cases Those Big Brown Trout in Your Local River Aren’t Falling Victim To a Size 10 Woolly Bugger or a 16 Prince NymphTo be honest, you’re probably unaware of what lies beneath the surface tucked against a log jam or wedged under that giant boulder mid-river that you’ve fished countless times. In most cases in my night fishing experience, there’s almost always a much bigger fish that shows itself at night than any other previous fish you’ve might have seen during the daylight hours.The majority of the largest trout I have ever seen were at night in less than 24” of water. Some of the most dominant predators on the planet feed at night… and brown trout are no different.Before we go further into tips, tactics, and tackle, I’d like to preface that night fishing obviously has its additional challenges and even dangers. Safety is by far the utmost importance when fishing, especially night fishing. Understanding every inch of the river you plan on night fishing is extremely important. Knowing every boulder, drop off/ledge, and casting obstruction can prevent you from going for an unexpected swim, broken rod, or even a hook to the face (speaking from experience). Always wear eye protection (clear or light illuminating lenses), two headlamps (you’ll drop one in the river), and try to take a fishing buddy with you just for peace of mind.Where I live in Pennsylvania as well as many places in the country, night fishing is more of a seasonal approach. By all means, you can night fish every month of the year and find some success, but there is definitely a “prime time” to be on the water. Typically, I personally begin my night fishing season during the “post hatch” season. After the majority of the caddis and mayflies hatch in May, and the water becomes skinny and shallow, this is when I find brown trout to be starved and more eager to eat larger meals.This Will Change the Way You Fly Fish Pressured WatersNight fishing in May, June, and even early July definitely produces plenty of fish, but not THE fish we’re all looking for. Once August rolls around and water temps begin to drop into safe fishing temperatures, that’s when you need to fish until the wheels fall off. Sleep becomes a thing of the past and coffee becomes your best friend. Your best shot at consistently catching brown trout 20”+ and even 24”+ is between August and October.The worst conditions for daytime fishing are your best conditions for night fishing. Low and clear water is by far the best water conditions to target big brown trout at night. Dominant brown trout adapt and hide so well during these conditions during the daytime which make them almost impossible to target. Once the sun begins to fade, the fish will migrate out of structure and move into feeding areas for the night.Swing It! Spey Streamer Fly Fishing TipsA mistake anglers often make is fishing the same deep hole they typically would fish during daytime. Brown trout will move into shallow sandy tail-outs, or push into the head of a run where the water might be less than 24” in depth. The inside seam of a deep pool also offers a great ambush point for a large brown trout.Tackle used when night fishing is very similar to fishing big streamers. Any 6wt, 7wt, or 8wt will suffice. On larger rivers, a trout spey or switch rod works great for swinging streamers or skating rodent patterns across the surface. A floating fly line is the most versatile line for night fishing in my opinion. You can fish surface flies, “pushers” that sit barely subsurface in the surface film, or even a streamer if you want to swing a baitfish into deeper pools. Your leader is extremely important when night fishing as well. Typically when fishing a surface style fly, keeping the leader short and stout is critical. Two feet of 20lb tippet to a blood knot, followed by three feet of 15lb tippet is typical when fishing surface style flies. Your leader needs to be strong and abrasion resistant. It’s not “if," it’s “when” you toss your flies into a tree.I have personally witnessed brown trout eat mice, rats, bats, baby birds, and even water snakes. A large brown trout over 24” is not much different than a musky. Don’t be afraid to think outside the box when night fishing. The biggest brown trout I’ve hooked at night was on a 6” rat pattern. The most important aspect of fly design for night fishing in my opinion is how much vibration, water displacement, or surface disruption you can create while not sacrificing your hook gap. Thin, but wide profile deer or foam body mouse flies work great. If using streamers, a pusher style fly that rides high in the water column seems to be extremely effective as well.Tied with a Surface Seducer Double Barrel Popper & Slider Body.How to fish you fly is totally dependent upon on moon phases, cloud coverage/ambient light, and speed of the current. A mouse is not going to swim upstream against the current.The two most effective retrieves are: Down and across just like you would swing a wet fly Casting upstream and working the fly back to youIf the current is a classic soft dry fly drift, I almost always work the fly down and across. Your rod tip height as well as your casting angle will dictate the speed of the fly. While fishing short and soft inside seams of a faster run/pool, orienting yourself downstream or below the fish will enable you to cast directly upstream and work the fly right to your feet. This is also a fantastic approach to work upstream along parallel with a heavily wooded bank. I have seen countless times where a fish will strike multiple times with this approach and ultimately eat the fly at your feet after missing 3-4 times in one drift.Be sure to always start your casts short, most fish are sitting right at your feet!At the end of a long night as the sun begins to rise; rest assure, that legendary fish most likely got away. More times than not, they have to make a series of mistakes in order for you to land them. Whether it ran you into a long jam, bent a 1/0 hook, or it came off just short of the net; the giants of the dark will keep you coming back for more. Tip your cap, swig some spiked coffee and keep after it. More often than not, they’ll leave you with a memory rather than a photo that you will never forget. Some nights, all you’ll have left is a fly patch full of chewed up foam. Want More Content Like This? Join the Flymen Mailing List at the bottom of the page!About Stephen Nymick:Stephen Nymick is owner of Stephen Nymick Fly Fishing LLC, and a Guide for Steelhead Alley Outfitters. He began fly fishing at just 5 years old on his local streams in Western Pennsylvania. The day his father took him out to get his first fly rod, he also came home with his first fly tying kit. Stephen has been fly fishing exclusively for over 20 years and has guided for 7 years. Throwing big streamers or mice for brown trout and swinging flies for Steelhead are Stephen’s true passions. You can follow Stephen on Instagram @stephennymick. For further questions, email Stephen at paflyco@gmail.com. To book a trip, contact Steelhead Alley Outfitters at 888-453-5899. Written by Stephen Nymick Filed under brown trout,  fly fishing,  fly fishing tips,  fly tying,  freshwater Tweet Comments on this post (8) Feb 26, 2024 Hi Sir/ We are manufacturers of fishing flies based in Uganda. We have qualified tiers who can maintain the best quality that a customer needs, we strictly deliver on time and use the right size of hooks.We tie all types of flies according to the customers orders.We are now looking for someone whom we can partner with for progress in both parties. Thank you as we wait to hear from you soon. under management by Fred— Fred luyali Apr 21, 2022 Hi,Re night time fishing for trout article.Thank you for a thoroughly informative article.Could you let me know what the chewed up flies in the picture are called and do you have any tying instructions you could send me?Kind RegardsDerek Coles— Derek Coles Oct 31, 2021 Dear Sir, I am Betty, a professional custom fly tier and the owner of a tube fishing flies fly group in business. With an experience of 20 years in fly tying in fulling mill company, I do produce all categories of fly patterns etc,Nymphs,Dries,Wets,Salmons,Saltwater, Pikes,Terrestrials etc. The quality of flies lies within my finger tips. I am always impressed with each and every fly that comes out of my vice.I have 20 good fly tiers who have experience in producing quality flies for the fly market globally. I will be glad if you would test my flies sample to match the quality of the same. I can assure you that with my flies you will emerge the best in the flies industry. If you are ready to foster flies business with me, I will be supplying you with a lower price per 1 dozen.I am eagerly waiting to hear from you. Best regards— Fred luyali May 04, 2021 This piece really got me thinking about my terminal obsession with netting three footers out of the Colorado where I live. I’ve actually landed a couple of those ghost browns @ zero-dark-thirty, and broke off even more. Your piece has me plotting already for some unconventional post-hatch, stealthy Ninja type spey missions.— Matthew Fullenwider Mar 18, 2021 I’m gonna be that guy and say that my biggest after dark brown came at 11:55 pm in mid-March…but overall I agree that late summer is the best time to raise fish in the late hours of the night. I would also add that a full moon is bad for mousing but great for streamers.— Patrick Houlton Mar 17, 2021 Nice article. Exactly what areas do you guide ?— John Kersting Mar 17, 2021 Great article, very insightful.— David Mar 17, 2021 Excellent article. I just started drifting my big tailwater after sunset last September to get the feel of casting streamers and catching fish after dark in big flows. Managing the boat and maintaining situational awareness is not for the faint of heart. One thing I wish the article had mentioned was technical specs on headlamps for night fishing— Drew Gilchrist Leave a comment Name Email Message

Many shooters find tritium night sights too distracting, especially in the dark. If you’re one of them, this will work wonders for you.

If not, you can also get the Green Tritium and Orange Outline Front with the Black Rear version.

No products found.

Durability

The AMERIGLO GL-506 sights can stand up to harsh conditions.

Made from machined steel, these sights are durable and reliable— regardless of what type of environment you’re shooting in.

Mounting & Installation

Installation is easy and took me about 10 minutes tops.

Make sure you drop a bit of Loctite Heavy Duty Threadlocker for security. Trust me, you don’t want your front sight coming off with recoil.

I installed the rear sight using the StarONE Universal Handguns Sight Pusher Tool with a plastic barrier and no markings occurred.

This sight set fits all Glock models (except 42/43). It sits at the right height and worked phenomenally with my 9mm suppressor.

It can also co-witness with red-dot sights like the Holosun 510c, the Vortex Strikefire II, or the Vortex Sparc.

Trust me: I tried them all.

Is the AMERIGLO GL-506 Tall Black Serrated Suppressor worth it?

Frankly, the AMERIGLO GL-506 sights are the best bang for your buck when you’re running a suppressor on your Glock.

Why? It comes with:

  • Durable design
  • Affordable price tag
  • Low-light level capability
  • Co-witnesses with many optics

The sights are backed up by AMERIGLO’s warranty. So long as you keep the receipt, you can easily request a replacement or repair. Also, their customer service is always A+.

Overall, the AMERIGLO GL-506 Serrated Suppressor is an excellent addition to any Glock MOS with a suppressor or any other red-dot-ready pistol.

Speaking of great additions: don’t forget to check out my latest Vortex Spitfire 3x review!

4. AMERIGLO GL-329 Tall Suppress: Best for Glock 17

The AMERIGLO GL-329 Tall Suppress is one of the best Glock suppressor sights I’ve used on the Glock 17.

In fact:

These sights worked so well, I shot 200 rounds easily on the day I tested it out on the range.

Let’s take a closer look…

Brightness

With the AMERIGLO GL-329, I have no problems shooting in low and no-light conditions.

The three-dot sight comes with white rings for daytime use & green tritium for low light detection and sight alignment. The large, bold dots make it easy to spot and grab the pistol at night.

The front sight is about .314” high and the rear sight sits at about .310”.

AMERIGLO GL-329 OVERVIEW

I haven’t had any issues personally but always check to make sure this provides enough clearance for your suppressor.

Durability

The AMERIGLO GL-329 Tall Suppress is built to last.

The sights are machined from bar stock steel and assembled with Swiss-made tritium. This combination results in ultra-durability and recoil resistance.

If you plan on using your Glock 17 for home defense and personal protection, the AMERIGLO GL-329 won’t fail you.

AMERIGLO GL-329 MOUNTED

Mounting & Installation

Both front and rear sights took 15 minutes to install.

The package includes both the front sight and a standard, dovetail rear sight.

AMERIGLO GL-329 PACKAGING

I marked the center of the stock sights on the slide with a pencil, then used a brass punch and hammer to drive out the old. I installed the new sights and aligned them with the previous mark I made.

AMERIGLO GL-329 OVERVIEW

Word of advice:

The front sight post does have some wiggle room, so double-check that you’ve got it straight before torquing to spec with the Loctite. Once they’re in, they’ll be secured without issues.

Also:

The top of the front sight is only visible at the very bottom of a Vortex Venom or Viper. If you intend to co-witness with the Vortex red dots, you may need to find taller suppressor heights.

AMERIGLO GL-329 FRONT SIGHT (1)

Is the AMERIGLO GL-329 Tall Suppressor worth it?

If you’re looking for a reliable and reasonably priced suppressor for your Glock 17, the AMERIGLO GL-329 is for you.

Why? It comes with:

  • Low price tag
  • Fits almost all Glocks
  • Popular 3-dot configuration
  • Excellent low-light performance

Additionally, the green tritium lamps are under warranty for 12 years after the date of manufacture and are guaranteed to last just as long.

See also  Benelli vs Franchi: Shotgun Showdown

If they do break, you can easily send them back with the company return form and AMERIGLO will replace or repair it. No questions asked.

With a combination of dependability and affordability, you really can’t go wrong with the AMERIGLO GL-329.

If you’re interested in more awesome handgun sights, check out my latest review of the best Walther PPQ M2 sights.

How to Install Glock Suppressor Sights?

One of the most common upgrades for Glock pistols is replacement sights.

If you install a suppressor or a red dot sight, you’ll most likely need a suppressor sight to shoot accurately— even if you’re using the best sights for the Glock 34.

So, here’s how to install the best Glock suppressor sights:

For the instructions below, I’ll be using the following tools:

  • Front Sight Tool
  • Rear Sight Pusher Tool
  • Loctite Heavy Duty Threadlocker
  • Gunsmith Punch Set
  • Nylon Vice Jaws

Step 1: Disassemble

Safely disassemble your Glock pistols. Make sure your weapon is unloaded, remove the magazine, etc. Then remove the recoil spring and barrel so you only have your slide left.

Step 2: Remove Front Sight

Get your screwdriver and remove the bolt for the front sight.

Make sure you save your old sights. If something happens and you need to return or replace your new sights, you need the original set to put back on your pistol so it can still be serviceable.

I like to screw in the old bolt back into the sight. That way, I don’t mix up the screws.

What I mean is— most of the time, the screw that goes into the Trijicon sight won’t fit into the original Glock front sight.

Step 3: Remove Rear Sight

For removing the rear sight, you have two options: using a rear sight pusher tool or you could also use a hammer and non-marring punch.

I highly recommend using the rear sight pusher tool. With this, you can simply clamp the slide and rotate the “pusher” to gently slide the old sight off.

Step 4: Install New Sights

FRONT SIGHT

Place the new front sight on top of the pistol. Apply a drop of the Loctite onto the new screw. Make sure you hold the sight while tightening the nut.

If you tighten too much, you can damage the sight. Before fully tightening, ensure that the sight is straight so you can make adjustments as needed.

On a side note:

I just made an in-depth guide on the best way to do an AR-15 A2 front sight removal. I highly recommend checking it out!

Moving along…

REAR SIGHT

As with removing the rear sight, I recommend using the pusher tool to install your new sights.

Start by aligning the new sight on the slider, then clamp both the slider and sight down. You can then turn the screw on the “pusher” and move the sight into place.

If you don’t have a sight pusher:

Place the slide into the vice jaw. Stage the new rear sight into the dovetail on the left side of the slide. Once you’re able to get about half of the sight base into the dovetail, start to tap the sight in place with a hammer and non-marring punch.

Be sure you use moderate hammer strikes so as not to hit your slide or your fingers. Lastly, make sure the rear sight is aligned with the rear dovetail. You can typically eyeball it or use calipers.

By the way, if you don’t have a rear sight pusher, here’s a great video guide on how to remove and install your suppressor sights.

Properly installing your suppressor sights is key to accuracy, but having an excellent suppressor sight, to begin with, can reduce a lot of work and frustration.

There are many options on the market and scouting the internet for dependable ones can take a lot of your time. The good news?

I already researched, hand-tested, and listed the best Glock suppressor sights for your every need above 🙂

Now It’s Your Turn

I hope you enjoyed my best Glock suppressor sights guide.

Now I want to turn it over to you:

Which suppressor sight will you pick for your Glock models? Or perhaps you already have one and would like to share your thoughts.

Either way, let me know by leaving a quick comment down below.

FAQ:

Previous articleMossberg 590 Tactical Review
Next articleTop 20 Colorado OTC Elk Units to Hunt for 2021
Ethan Smith
Ethan Smith
Ethan Smith is a seasoned marine veteran, professional blogger, witty and edgy writer, and an avid hunter. He spent a great deal of his childhood years around the Apache-Sitgreaves National Forest in Arizona. Watching active hunters practise their craft initiated him into the world of hunting and rubrics of outdoor life. He also honed his writing skills by sharing his outdoor experiences with fellow schoolmates through their high school’s magazine. Further along the way, the US Marine Corps got wind of his excellent combination of skills and sought to put them into good use by employing him as a combat correspondent. He now shares his income from this prestigious job with his wife and one kid. Read more >>

RELATED ARTICLESMORE FROM AUTHOR