Here’s our review of the Ravin R10 crossbow. Ravin presents rifle-like crossbows that are significantly smaller and narrower than crossbows of other brands. The R10 is the successor of the R9 Predator. We also reviewed the Ravin R20 and the R26.
We were very excited to put the Ravin R10 to the test and can already tell you that we had a lot of fun with the crossbow for this review and we will have a lot of fun with the crossbow in the coming years because the R10 is built to last.
In the package we found the Ravin R10 crossbow with Predator Dusk Camo, a 100 yard illuminated long-range scope, three Ravin arrows(300 grain) with nocks and 100 grain practice points, a detachable cocking handle, mounting bracket, and a Ravin user manual.
The crossbow comes in the exclusive to Ravin crossbows, Predator Dusk Camo, and is also available in Gunmetal grey camo.
Ravin R10 Crossbow Specs
Design and Construction
The Ravin R10 is significantly more compact compared to its predecessor, the R9 Predator. The R10 measures a total length of 33 inches, an axle to axle width of 10.5 inches uncocked, and only 6 inches when cocked. The Ravin R10 tips our scales at 6.8 pounds.
The Ravin R10 is a lightweight crossbow that is highly maneuverable, the crossbow is suited for run and gun situations and easy to handle in tight spaces such as hunting blinds,
Ravin is of course famous for its patented Helicoil technology. Crossbows with Helicoil have a number of design advantages, and it allows the Frictionless Flight system to work.
The R10 features Helicoil technology and the Frictionless Flight System. Helicoil allows the cams to rotate 340-degrees, generating higher speeds with better accuracy. With a traditional crossbow, the entire arrow rests on the rail.
The Helicoil system allows an arrow to float freely, eliminating energy loss due to friction. The Helicoil cams ensure that the cable barely touches the rails and there is no downward pressure on the cable. As a result, the cable is not slowed down and barely wears.
Scope
The Ravin scope is a high-end 100 yard crossbow scope that is made of high-quality materials. The scope features fully coated lenses with red and green illuminated reticles. The scope is crystal clear to look through and performs well. The Ravin scope is fog-free and waterproof and contains shock and kickback resistant technology.
Cocking mechanism
The R10 is equipped with a built-in crank cocking mechanism, the so-called Versa-Draw cocking system. This cocking mechanism reduces the crossbow’s draw weight to a mere 12 pounds of force. The cocking handle is of course detachable.
The Versa-Draw cocking mechanism also ensures that the crossbow is cocked 100 percent evenly for an extra clean shot. Cocking by hand is not possible, because of this you are not able to release half-cocked.
Trigger
The Ravin R10 comes with Ravin’s Tac Trigger Fire System. It is a crisp 4 pound trigger that gives you control over the shot. Shooting with the Tac trigger system is not noiseless but very quiet and with little vibration. The trigger system contains anti-dry fire technology to prevent the crossbow from dry firing.
Range Test
The Ravin R10 is a fast and powerful crossbow that shoots arrows with speeds up to 400 feet per second and is capable of delivering 142 KE knockdown power.
We used the Ravin arrows(300 grain) to speed test the Ravin R10. On our chronograph, we measured speeds in the range of 360-380 feet per second.
The R10 is an extremely accurate crossbow. The superb stability of the crossbow combined with Helicoil technology and the excellent 100-yard scope make the R10 one of the most accurate crossbows available on the market today.
WARNING: DO NOT USE NON-RAVIN ARROWS OR NOCKS WITH YOUR RAVIN CROSSBOW.
Assembly
The Ravin R10 comes fully assembled and with a Ravin crossbow manual. You only have to mount the scope, attach the side mount quiver, and accessory bracket. It takes a couple of shots to finetune the scope.
Install the scope
Tho install the scope first attach the bottom rings on the rail. Lay the scope into the bottom rings. Place the top rings on the bottom rings so the scope is surrounded. Lighty snug up the screws on the top rings so you can still freely move the scope in the rings. Adjust the scope until you find the furthest point forward to ensure maximum eye relief (at least 2 inches from your eye) that allows you to see a full field of view.
Remove the elevation turret cap and place a level on the elevation turret. Rotate the scope in the rings until it is level with your the crossbow limbs. Tighten the upper rings, alternating between front and back screws, while still keeping an eye on your scope levels. Keep slightly tightening and alternating from front to back until secure. Rotate the FPS selection dial to match the manufacturer’s advertised speed.
Attach the quiver
Attach the mounting bracket to the bottom of the Ravin R10. Screw the mounting bracket into the hole on the bottom of the Picatinny rail with the sloped surfaces on the mounting bracket pointing forward.
To attach the Quiver to the mounting bracket, press and hold the thumb release on the mounting bracket. Position the posts of the quiver in the holes on the mounting bracket with the hood facing forward. Release the thumb release to lock the Quiver in place.
Reverse the process to remove the quiver from your crossbow. The quiver can be mounted on either side of the mounting bracket. Most right-handed shooters prefer to locate the quiver on the right side.
Attaching and removing the cocking handle
To attach the Cocking Handle to the mounting bracket, press and hold the thumb release on the mounting bracket. Position the posts of the Handle in the holes on the mounting bracket with the Cocking Handle head facing forward. Release the thumb release to lock the Cocking Handle in place. Reverse the process to remove the Cocking Handle.
Recommended Accessories
Arrows & Broadheads
We recommend using 400 grain Ravin Arrows. These arrows are made from 100 percent pure carbon and offer quiet, hard-hitting performance. They feature brass inserts and aluminum nock bushings.
Combine the arrows with Ravin’s mechanical broadheads. These broadheads are optimised for crossbows with velocities of up to 450 feet per second.
Storage and Transportation
We recommend a Ravin R182 Hard-Shell crossbow case to properly store and carry the Ravin R10.
We recommend Ravin’s R260 padded crossbow shoulder sling. It is an adjustable 2 1/2-inch wide padded non-slip sling with a neoprene design.
