What Every Hunter Should Know About Deer Gestation Period

0
32
Video how long is the gestation period for a deer

I received a first-hand tutorial in whitetail deer gestation period just the other day. While hunting for morel mushrooms, I stumbled on a tiny fawn curled up in the downed top of an oak tree. I’ve found several fawns over the years as I roam the May woods on the hunt for turkeys or mushrooms, and each one strikes me as miraculous.

This fawn, likely only a day or two old, was perfectly still—I had to wait patiently to see its chest heave a small breath- as I took a few quick photos. Like a child thinking they couldn’t be seen if their eyes remained shut, the fawn never blinked. Perhaps even more amazing, my retriever Cooper, a 3-year old golden that doesn’t miss much and has a tremendous nose, was trolling through the area and never had a clue the fawn was there, despite being within 20 yards at least twice. Though the early life of a fawn is certainly precarious, this one had clearly gotten off to a good start.

I walked off after a minute or two, committing the date of my find to memory. By back-dating from this encounter, I could tell almost to the day when this little deer was conceived. Which explains why knowing a little about deer gestation period is so important to hunters and managers.

Deer Gestation Period and the Rut

Understanding deer gestation period allows you to date the rut based on the timing of the fawn drop. John Hafner Photography

Whitetails have a gestation period of about 200 days, or approximately seven months. Using this information, I could back-date the fawn to get an idea of when its mother was bred. I found the fawn on May 20th, and I believed it was only a day or two old, which means the fawn’s mama was successfully bred around November 1, 2022. This was a minor surprise to me; while well within the understood peak breeding dates in Minnesota (which run from late October through late November) the doe was bred quite early in the cycle. This is great information as I prepare for this fall’s hunting season; while I always focus plenty of effort on the last week of October, I’ll know that, on this farm at least, the action then might lean more toward peak breeding, rather than late pre-rut.

See also  Shark Attack Statistics & Interesting Facts That You May Not Know!

More generally speaking, knowing the gestation period for deer helps dispel myths about annual rut timing. By studying the development of the fetuses

of does killed in late winter or in spring and back-dating based on deer gestation period, biologist have long since confirmed that in the northern part of the country, the whitetail rut

happens at roughly the same time year after year—from early to mid-November—based on photoperiod. Warm weather does not delay the rut any more than a certain moon phase kicks it into gear. And this is not a guess. It’s a fact backed up by measured fetus development and the known gestation period for deer.

Deer Gestation and Fawn Survival

It’s all built around survival of a the species. In the north, where harsh winter weather poses a mortal threat, the timing of the fawn drop is critical, and evolution has seen to it that in a healthy deer herd, fawns will drop when their chances of survival are highest, year after year. This also explains why the fawn drop, and therefore the rut, is much more spread out in the South, where the absence of harsh winters allows much more leeway for survival.

In the north, fawns born in late May and June have the best chance at survival. Dan Stroik / Adobe Stock

Finding the fawn when I did was also a good omen. In the upper Midwest and across the northern reaches of whitetail range, fawns born in May and June are simply better equipped to survive the weather and temps of their first few days of life and the coming late fall and winter. Fawns dropped too early can succumb to cold, wet spring weather, and fawns dropped too late (though rare, I have seen spotted fawns as late as September) are just not as physically developed and, while certainly not doomed, they are going to face some true challenges if the winter is a hard one. Remember, mature does and bucks will drive a fawn off a winter food source to insure their own survival, so if food is not abundant, any late-born fawns are in serious trouble.

See also  .25-06 Remington for Mule Deer Hunting? Best Ammo (Round, Load, Cartridge) for a Successful Mule Deer Hunt Hunting Calibers 04 Apr, 2020 Posted By: Foundry Outdoors Is the .25-06 Remington a viable caliber/load/round/cartridge for mule deer hunting? The accurate answer is “it depends”. However, the goal of this article is simply to address the question of whether the .25-06 Remington is within the ideal range of suitable calibers to harvest mule deer. As with anything, the devil is in the details. To answer the question completely, we would need to evaluate the downrange distance to the mule deer, the bullet type, the grain weight of the bullet, the physical condition of the firearm, the size of the mule deer in question, the shot placement, the local wind conditions, the expected accuracy of the shooter, the ethics of the ideal maximum number of shots – the list goes on. [Click Here to Shop .25-06 Remington Ammo]What we can do is provide a framework to understand what average conditions might look like, and whether those are reasonably viable for a shot from the average shooter to harvest a mule deer in the fewest number of shots possible, i.e., ethically. Let’s dive right in. In the question of “Is the .25-06 Remington within the ideal range of suitable calibers for mule deer hunting?” our answer is: Yes, the .25-06 Remington is A GOOD CHOICE for mule deer hunting, under average conditions, from a mid-range distance, with a medium grain expanding bullet, and with correct shot placement.Let’s look at those assumptions a bit closer in the following table. Assumption Value Caliber .25-06 Remington Animal Species Mule Deer Muzzle Energy 2360 foot-pounds Animal Weight 225 lbs Shot Distance 150 yardsWhat is the average muzzle energy for a .25-06 Remington? In this case, we have assumed the average muzzle energy for a .25-06 Remington round is approximately 2360 foot-pounds. What is the average weight of an adult male mule deer? Here we have leaned conservative by taking the average weight of a male individual of the species, since females generally weigh less and require less stopping power. In this case, the average weight of an adult male mule deer is approximately 225 lbs. [Click Here to Shop .25-06 Remington Ammo]What is the distance this species is typically hunted from? Distance, of course, plays an important role in the viability of a given caliber in mule deer hunting. The kinetic energy of the projectile drops dramatically the further downrange it travels primarily due to energy lost in the form of heat generated by friction against the air itself. This phenonemon is known as drag or air resistance. Thus, a caliber that is effective from 50 yards may not have enough stopping power from 200 yards. With that said, we have assumed the average hunting distance for mule deer to be approximately 150 yards. What about the other assumptions? We have three other primary assumptions being made here. First, the average bullet weight is encapsulated in the average muzzle energy for the .25-06 Remington. The second important assumption is ‘slightly-suboptimal’ to ‘optimal’ shot placement. That is to say, we assume the mule deer being harvested is shot directly or nearly directly in the vitals (heart and/or lungs). The third assumption is that a projectile with appropriate terminal ballistics is being used, which for hunting usually means an expanding bullet.Various calibersA common thread you may encounter in online forums is anecdote after anecdote of large animals being brought down by small caliber bullets, or small animals surviving large caliber bullets. Of course those stories exist, and they are not disputed here. A 22LR cartridge can fell a bull elephant under the right conditions, and a newborn squirrel can survive a 50 BMG round under other specific conditions. Again, the goal of this article is simply to address the question of whether .25-06 Remington is within the ideal range of suitable calibers to harvest mule deer - and to this question, the response again is yes, the .25-06 Remington is A GOOD CHOICE for mule deer hunting. [Click Here to Shop .25-06 Remington Ammo]This article does not serve as the final say, but simply as a starting point for beginner hunters, as well as a venue for further discussion. Please feel free to agree, disagree, and share stories from your own experience in the comments section below. Disclaimer: the information above is purely for illustrative purposes and should not be taken as permission to use a particular caliber, a statement of the legality or safety of using certain calibers, or legal advice in any way. You must read and understand your own local laws before hunting mule deer to know whether your caliber of choice is a legal option.Foundry Outdoors is your trusted home for buying archery, camping, fishing, hunting, shooting sports, and outdoor gear online.We offer cheap ammo and bulk ammo deals on the most popular ammo calibers. We have a variety of deals on Rifle Ammo, Handgun Ammo, Shotgun Ammo & Rimfire Ammo, as well as ammo for target practice, plinking, hunting, or shooting competitions. Our website lists special deals on 9mm Ammo, 10mm Ammo, 45-70 Ammo, 6.5 Creedmoor ammo, 300 Blackout Ammo, 10mm Ammo, 5.56 Ammo, Underwood Ammo, Buffalo Bore Ammo and more special deals on bulk ammo.We offer a 100% Authenticity Guarantee on all products sold on our website. Please email us if you have questions about any of our product listings. Leave a commentComments have to be approved before showing up Your Name * Your Email * Your Comment * Post Comment

Overall Deer Herd Health

Finally, the timing of the fawn drop is also a good indicator of buck-to-doe ratios and overall herd health. Late-born fawns typically mean that doe populations could be out of control; if there aren’t enough bucks to service does as they come into estrous, the does will continue to cycle every 28 days, often until they are bred. This prolonged rutting activity is not good for a deer herd; not only does it result in late-born fawns, but it stresses bucks as they chase and breed does for months instead of weeks. Having a relatively brief, perfectly-timed rut is the best for deer.

Sadly, I didn’t find any morels that May afternoon, but I found something even more important; a healthy, new-born fawn that not only provided me with some moments of beauty, but gave me a glimpse into the health of the deer herd.

Previous article7 Best Recreational Kayaks for Beginners in 2024
Next articleThe Cutting Edge: 18 Leading Axe Brands
Ethan Smith is a seasoned marine veteran, professional blogger, witty and edgy writer, and an avid hunter. He spent a great deal of his childhood years around the Apache-Sitgreaves National Forest in Arizona. Watching active hunters practise their craft initiated him into the world of hunting and rubrics of outdoor life. He also honed his writing skills by sharing his outdoor experiences with fellow schoolmates through their high school’s magazine. Further along the way, the US Marine Corps got wind of his excellent combination of skills and sought to put them into good use by employing him as a combat correspondent. He now shares his income from this prestigious job with his wife and one kid. Read more >>