How to Fix Cracked Hunter Boots

If you’re a fan of Hunter boots, then you know that they can be both stylish and functional. However, keeping them in good condition can be challenging if your boots get cracked. Whether the damage is from water, salt, or just general wear and tear, this guide will show you how to patch them up in no time!

This blog post will show you how to fix cracked Hunter boots using simple techniques that won’t damage the boot material. So read on for tips on how to get your Hunters back in good shape!

Things or Materials You’ll Need

• Chapstick or Petroleum Jelly
• Scissors
• Duct Tape
• Black Sharpie
• A Metal Covered Bottle Cap
• Paper or Cardboard

12 Steps to Follow: How to Fix Cracked Hunter Boots

Step 1

First, locate a small enough stick or twig so it reaches from one of the holes in your boot up to your heel. Then, grab the stick and use it to scrape all of the debris, salt, snow, etc.

Step 2

Remove all debris from your boots using a small stick or twig. Once you have removed everything, run the Chapstick or Petroleum Jelly along with the split. Doing this will help keep it moist while you are repairing your boot.

Step 3

Use the black sharpie to color over the crack. This will help it blend in with your boot and prevent further damage from happening. Do this to both sides of the shoe.

Step 4

Take a clean cotton ball or cloth, moisten it with water, and then use it to wipe away any dirt that is still on your boot. This will ensure that the fixative has a clean surface to attach to and help prevent new cracks from appearing.

Step 5

After the split is gone and the area is dry, place a piece of clear tape over it before using duct tape. Finish this step by covering the whole split with duct tape.

Step 6

Set a metal bottle cap over the split. This will help strengthen the boots once they are dry and put them on again. The idea is that if you did it correctly, the boots should hold together until you get home or to a place where you can properly fix them.

Step 7

Place your boots in the sun with the metal bottle cap over the split. Make sure they are sitting evenly so that no air can get in between them. This will help dry them out faster without causing further damage to your boot.

Step 8

After two hours, check on your boots and return them if they aren’t completely dry. Ensure the area is arid before moving on to the next step.

Step 9

Now, cut off a small piece of duct tape and place it over the split in your boot using clear foot powder or baby powder. Use an even coat of this powder across both sides of your boot.

Step 10

When the duct tape has been applied, place a piece of duct tape over it and repeat with clear foot powder or baby powder. Follow this by placing another piece of tape over the split and using your Chapstick or Petroleum Jelly once more to coat both sides of your boot. Repeat until you have covered up the split.

Step 11

Place your boot dryer or an old shoe for weight inside your boots and leave them there overnight. The next morning, you’ll want to remove them and give the area another coating of clear foot powder or baby powder. Then, put them back on and wear them as normal until they are completely dry.

Step 12

Once they are dry, take a piece of tape and cut it small enough to fit over the split. Cut off any excess tape after you have placed it where you need it. Follow this with clear foot powder or baby powder and repeat until your split is completely covered and sealed up. The split should be gone, and your boots should look good as new.

You Can Check It Out to Buckle Hunter Boots

Note

If you don’t have clear foot powder or baby powder, place a piece of tape over the split and use either Chapstick, Petroleum Jelly, Glue, or all three until your boot is fixed! These are just temporary solutions how to fix cracked hunter boots while you are on the go.

Some Tips and Suggestions

Here we have given some tips and suggestions on how to fix cracked hunter boots.

1. Consider using a spray adhesive instead of glue to strengthen the bond between layers of transparent tape. Spray adhesives are designed for use on smooth surfaces, so be sure to test on an inconspicuous area first.
2. To adjust the fit of your boots after you’ve taped them together, try shaving down the heel with a file for a better fit.
3. If your boots are too tight after shaving the heel, consider adding an insert or two to relieve some pressure on your feet.
4. Remember that if you take good care of your taped-together Hunter boots, they should last much longer than before!
5. Consider boots like Blundstones for quick fixes. They’re more affordable and very easy to tape together since there are fewer seams.
6. If you determine that your split is not fixable, you can always return them or exchange them for a new pair online or at your local Hunter dealer!
7. If the crack on your boots is on the sole of your boot, you might want to consider taking them to a shoe repair shop. They can add another layer or two on top of the crack and use extra reinforcement to keep it from splitting again.

Seven Reasons That Causes Cracked Hunter Boots

Now that you know how to fix cracked hunter boots, here are some reasons that cause cracked hunter boots so that you can prevent them in the future.

1. Fade

When the color of your boots fades, it is a sign that you need to reglaze them. This can result from water, sunlight, and heat exposure.

2. Water Damage

If your boots have been moistened too often or kept in a humid area for long periods, then they can crack or split. This is because the leather becomes too soft and loses its shape.

3. Wet Boots

If you have been wearing your boots in snowy, slushy, or rainy weather, then the cold and moisture can cause damage to your boots.

4. Sunlight Damage

This is a common problem for rubber-soled shoes of any kind. The sun’s ultraviolet rays dry out your shoes and can eventually lead to cracks and other damage.

5. No Maintenance

If you do not clean and maintain your boots regularly, they will not last as long. Routine care can prevent dirt, water, salt, snow, and other harmful elements.

6. Poor Storage

If you keep your boots in an unheated area or do not cover them during the winter months, for example, then the leather will become stiff and brittle.

7. Faulty Leather

If your boots are made from faulty leather, they will not last very long. This type of damage is difficult to repair.

Does Gorilla Glue Work on Rain Boots?

Gorilla Glue works on a wide variety of materials, but the company cautions that it shouldn’t be used on some leathers and rubbers. Gorilla glue is water-based and contains no VOC or formaldehyde. Nevertheless, the product makers warn against using it on plastics, fabrics, foams, and rubbers, including most rubber boots.

Some types of rubber can react with the glue and turn white, while others will experience a significant loss of strength after being glued. It is possible to use Gorilla Glue on some rain boots, but only if the product lists the boot as compatible.

What Glue Is Best for the Rain Boots?

It would help if you found a strong adhesive that will bond with the rubber of your Hunter boots. Most waterproof glues or cement are ideal for this type of repair, but they may not be enough on their own. Be sure to add a quick-drying clear coat to your project after applying the glue while still wet. This will provide extra protection and make your new bond last longer.

Rather than spending money on a new pair of boots, you can get many more years out of your current pair by fixing the straps. This is not as difficult as it may sound and won’t require any extra materials that you don’t already have at home. You need some gum or glue that has been designed to adhere to rubber, a few fine-grit sandpaper sheets, and a steady hand.

Can You Fix Cracked Rubber Boots with Shoe Goo?

Shoe Goo is a thick, rubber-like liquid that can be applied to the cracks in the rubber boots to help seal them and protect them from further damage. Shoe Goo is a liquid or putty, but both types contain an adhesive that works similarly. This product can be used on new or old boots and may help restore the boots’ waterproofing.

The product doesn’t dry remarkably quickly, so it allows for repairs to be made without caving to the pressure of having to run out the door with wet feet. Shoe Goo works best on rubber that isn’t very thick or heavily cracked, as it can weaken over time and should only be used on boots that don’t require heavy-duty repairs.

Frequently Asked Questions

What Is the Best Way to Fix Cracked Hunter Boots?

A: When the leather on your brand new boots cracks, it’s very disappointing. Fortunately, there are ways to fix them to look just like new again. The simple way to repair cracks is to simply put a small amount of shoe cream or conditioner into the aperture and then work it in with your fingers.

You can also use a wet cotton tip swab to rub the product into the crevice. Let it dry overnight, and then apply a second coat if necessary. Buff with a soft cloth to bring back the shine once dried. An easy way to avoid any damage to boots is by simply applying mink oil, which helps waterproof them. You must buy high-quality mink oil to get the best results.

What Are the Dangers of Fixing Cracked Hunter Boots?

A: Using too much shoe cream or conditioner can make them look worse, not better. It may also cause the leather to dry and crack even more quickly. In addition, many products sold for this purpose tend to leave a greasy film on the boots that will attract and hold dirt and dust, which may ultimately cause your boot to dry rot.

Do-it-yourself repairs also run the risk of permanently damaging the boots. For example, it is easy to accidentally use too much shoe cream or conditioner or rub it into unintended areas. This can result in a discolored surface on the leather, a more severe cracking in the future, or some other unusual change.

What Can I Use to Repair a Broken Zipper on My Hunter Boots?

A: Repairing a broken zipper on your favorite Hunter wellies is much cheaper than replacing the boots. The plastic teeth are held together with an interlocking system attached to two walls of the zipper housing. This means you need to piece together both sides of the wall to restore the strength lost when one side breaks away from its counterpart.

Hunter boots are made with a waterproof material, and the zipper is not. Without one or both of these elements, your boots will no longer be truly waterproof. You can piece together the wall holding the teeth together with a vinyl adhesive, which you can find at any hardware store. Though it comes in a tube and is designed for use on sticky surfaces, the vinyl adhesive provides a waterproof hard shell once it has dried and hardened.

Conclusion

If you want to make your boots last longer, then there are a few ways to fix the cracks on them. One way is using boot polish or shoe cream on just the surface of the leather where it’s cracked. This will fill in the gaps and help seal up any exposed areas, which could cause more damage if not taken care of right away.

Another solution would be to use something like wax paper over all of the parts of your shoes that have cracks so they don’t get worse. We hope this blog post on how to fix cracked hunter boots has been helpful. If you have any questions or thoughts about how to take care of them in general, feel free to reach out! We’d love to help you get back on track with these top-quality shoes that will last for many years if taken care of properly.

You Can Check It Out Put Beads on Shoelaces