Today, I’m going to be testing a head designed specifically for turkeys… the VPA Turkey Spur.
Now, even though this head is designed specifically for turkeys, I put it through my normal test protocol. That way, you can compare the results with other broadheads, and see if it might be a good fit for you.
So, let’s get started looking at what I found out!
The VPA Turkey Spur Up Close
Here’s a good look at the head. Man, what a really cool looking design! I’ve never seen another broadhead like it!
There’s about a quarter of an inch of the second blade that’s not sharpened, all the way around, just to give it some knockdown power in releasing or transferring the energy, that’s built up from the momentum, into the animal
The duller part of the blade is also supposed to help decelerate the speed of the arrow and slow down the penetration, so that the bird really feels the full impact of the arrow. And then, it’s sharpened again on these ends.
#ad
Testing Of The VPA Turkey Spur Broadhead
I was eager to see how the VPA Turkey Spur performed!
For the testing of the VPA Turkey Spur broadheads, I used by BowTech CP28 set at 72 pounds. I also used Bishop FOC King arrows for most of the shots. (On the really hard impact shots, I used the Bishop FAD Eliminators, because they can really take a beating!)
Flight Forgiveness Test
I shot one field point and then one of the Turkey Spurs at 30 yards. It had moderately forgiving flight.
Initial Sharpness Test
In this test, I measured how much force it takes to cut a wire with the blade of the head. The lower the number, the better.
Penetration Test I: 2/3″ rubber mat, 1/2″ MDF, Clear FBI Ballistic Gel
Edge Retention Test: (Sharpness After Penetration Test I)
It took an extra 25 grams of force to cut through the wire which is a 9.5 in a 10-point scale.
#ad
Penetration Test 2: Layered Cardboard
Angled Shot Test: 1/4″ MDF And Carpet
Durability Test #1: 1/2″ MDF (Max 3 Shots)
#ad
Durability Test #2: 22-Gauge Steel (Max 2 Shots)
Concrete Test
Final Thoughts On The VPA Turkey Spur Broadheads
So what do you think of this broadhead?
It performed really well in all the testing. The flight was good, the penetration was good, and the durability was good. It definitely has a lot of strengths.
But when it comes to really choosing a broadhead for a specific animal, like in this case, turkey, I’ll be honest, I don’t really get it.
You know, I understand the design, but it doesn’t really add that much more lethality for turkey over any three-blade 1-1/8″ cut like a Montec or something like that. I mean, maybe it has a little bit more knockdown power with those blunted blades in the back.
When it comes to hitting the heart, lungs of a turkey and really putting it down fast, I want the biggest cut I can possibly get.
There are a lot of other fixed blades with a bigger cut than this.
And, there’s also a lot of mechanicals and hybrids with a much bigger cut than this.
So, if you like using these and they work good for you, that’s awesome, more power to you!
I really enjoyed testing it. But, I am not going to put this on the end of one of my arrows on a hard earned shot on a turkey. I’m going for a much bigger cut to put that bad boy down as quickly as possible.
