Rigging and Setup for Dungeness Crab

0
404

How to Rig and Setup Crab Pots.

Dungeness Crabs are abundant in every bay and inlet along the Pacific Coast and are considered a summertime delicacy. The beauty of living near the saltwater and being able to head out in even a small boat and catch these tasty shellfish is not lost on thousands of people who go out crabbing every summer. I wrote this post for those of you who are new to crabbing and need a little information on what equipment you need. You can also check out our post Puget Sound Dungeness Crabbing Buying Guide for some of our favorite equipment.

A good haul of Dungeness Crab from Puget Sound. This pile will easily feed the whole family!

Crab Pots

There are many different styles of crab pots but basically you can separate them into two groups, round pots and collapsible traps.

Pots are usually geared more towards those looking to crab in deeper water or heavier currents. If you plan on trying to catch Dungeness Crab in the Pacific Ocean, where currents are strong, you want to pick up heavily weighted round pots. Pots tend to be heavier with the weight build into the frame, most weigh 10 to 20 pounds. They are also more expensive than collapsible traps. However, collapsible traps are extremely popular in areas like Puget Sound.

Collapsible traps tend to be less expensive. However, they are light weight and you need to add some pot weights so they don’t drift off. I spend most of my time crabbing in Puget Sound and the SMI/Beau Mac collapsible traps are my favorite. We typically are setting our traps in less than 80 feet of water, so a little added weight is all that is needed to keep the trap from drifting. Collapsible traps are also easier to store. If you plan on keeping your traps on your boat they are real space savers. If you are crabbing from a small boat where space is an issue, bring along the collapsible traps and assemble them one-by-one as you go!

See also  Some precharged pneumatic basics explained

Both traps and pots can be soaked for a long period of time. If you are planning on soaking for a few hours while fishing or overnight, traps and pots are preferred over rings.

Crab Rings

Crab rings are extremely popular, very effective, and preferred if you are looking to catch crab in shallow waters. Rings are popular with folks trying to catch crab from a dock or pier. I like to use crab rings when I am fishing in less than fifty feet. Rings lay flat on the bottom but when pulled, they create a basket that funnels crab to the bottom and keeps them there. Because a ring will simply lie on the bottom, crabs are free to come and go as they please. Fresh bait will draw them into the ring. When using rings, allowing a soak time of about 20 to 45 minutes is perfect. Crab will quickly eat away any bait. They will start searching for another food sources once the bait is gone.

Crab Trap Harness

When pulling up a crab ring, trap or pot it is important to pull it up evenly. A ring that is pulled up slanted can allow for crabs to crawl out the edge of the ring; a trap that is pulled up slanted allows crabs to potentially escape through an open door. A 3-way or 4-way harness solves this problem. These are designed to clip to the corners of a trap, or clipped evenly around a round pot or ring for a smooth and level retrieve. Harnesses are highly recommended over just tying your line to the edge of your pot/ring/trap.

See also  9 Best Low Light Hunting Scopes For Your Rifle (2024)

Crabbing Lines

There are two options for your crabbing main line, yellow ¼ inch poly line or leaded line. Yellow poly is thinner, cheaper and it floats. Floating lines can cause problems when crabbing in an area with boat traffic. Let’s just say you have a 100’ line and decide to set your trap at a 50’ depth, lines can easily be tangled in a boat’s prop or cut off by one. If you decide to use yellow poly, be sure to clip on some weight to the line to pull it under the surface. I find snapping on a weight is a pain, and that a thin line is less comfortable to pull. Leaded lines are a little more expensive, but they offer huge benefits! Leaded line is easy to coil. You won’t have to worry about getting it tangled in someone’s prop because it sinks.

Crab Buoy

Here in Washington, we have many requirements pertaining to our crab floats. They must be half red, half white. You need to write your name and address on the buoy. They must be on the surface and visible at all times. Identifying which buoy belongs to you can be challenging at times. Use a PVC staff and either paint it a bright color or attach a flag to it, this will help you locate your pot quickly. Some folks will connect a multicolored buoy to their required red/white. I am a huge advocate of any form of customization; imagine motoring into a sea of red/white buoys and having to motor around looking for the one with your name written on it!

Bait Boxes

Bait boxes are an easy way to store bait in a trap. A bait box will slow down the crabs’ attempts to devour your bait. I prepare all of my bait boxes in advance, then I put them in a cooler so they are ready to go. Attach them permanently with wire ties or zip ties, temporarily with small bungies.

See also  Concealed Carry Options for Running and Jogging

Bait Pins

If you are using a fish carcass for bait, a bait pin can be a great alternative to the bait box. Just run the pin through the mouth of a filleted out rockfish or salmon and into the bottom mesh of your ring/trap/pot.

Best Dungeness Crab Bait

Fresh baits work best. Save any filleted carcasses of salmon, trout, rockfish or lingcod because they make excellent bait for Dungeness Crab. Also, I have done very well with chicken, turkey legs and herring. One of the funnest things to do is catch flounder or sand dabs and use them in the trap.

Crab Measuring Device

Having a measuring device with you is extremely important. Every marine area has a specific minimum size requirement for crabs, and a crab measuring tool is essential. Possessing a crab that is even 1/16” under the minimum size can potentially yield you a confiscation of your entire catch and a hefty ticket.

Pot Pullers and Davits

Having an electric pot puller is nice for heavy pots or crabbing in deeper water. If you plan on doing any shrimping then you definitely need to invest in one. Even having a davit with a pulley on the boat makes pulling much easier. Plus it keeps the line from rubbing on the gunwale of the boat and keeps the pot from scratching up the side of your boat.

Electric Pot Puller Suggestions

  • Scotty 2500 Electric Pot Puller – View on Amazon
Crabbing davit
A davit with a pulley makes pulling up crab pots much easier!
Previous articleHow to Barbecue a Rattlesnake
Next articlePost-Kill Rituals: Matters of the Heart
Ethan Smith
Ethan Smith is a seasoned marine veteran, professional blogger, witty and edgy writer, and an avid hunter. He spent a great deal of his childhood years around the Apache-Sitgreaves National Forest in Arizona. Watching active hunters practise their craft initiated him into the world of hunting and rubrics of outdoor life. He also honed his writing skills by sharing his outdoor experiences with fellow schoolmates through their high school’s magazine. Further along the way, the US Marine Corps got wind of his excellent combination of skills and sought to put them into good use by employing him as a combat correspondent. He now shares his income from this prestigious job with his wife and one kid. Read more >>